Sakz Mk 2 Shema Podkljuchenija -

The SAKZ-MK-2 typically uses connectors for fast, "plug-and-play" installation. Follow these steps for a standard setup: Valve Connection:

Install near the ceiling (gas is lighter than air).

Connect the (methane) and SZ-2 (carbon monoxide) sensors to the BSU.

Install at breathing height, roughly 1.5–1.8m from the floor.

Connect the impulse valve to the unit using the dedicated "Valve" (Клапан) port.

The valve is usually normally open and requires a manual reset after a trip. Sensor Interconnection:

The "brain" that processes signals and triggers the valve.

Knowing the exact valve model you are using will help me provide a more detailed pinout for your specific wiring.