: Often used for more complex geometry, this method allows you to use a specific edge or curve as the split point for the draft. This is highly recommended for parts with non-planar divisions.
Based on community discussions regarding similar drafted features, here is how you can effectively apply a draft: p1074464_wt.7z
: In many CAD packages like SolidWorks or Autodesk Inventor , you can enable a "Draft" option directly within the Extrude feature properties to apply the taper as the solid is created. Troubleshooting and Advanced Techniques : Often used for more complex geometry, this
: If a face is too complex, use a "Split Line" to break it into smaller segments before applying the draft to each part individually. Troubleshooting and Advanced Techniques : If a face
: This is the standard method where you select a "neutral plane" that determines the pull direction. The draft angle is then applied to the faces you select, pivoting them from that plane.
: If a specific area requires no taper, try entering a value of "0" for the draft in that section to maintain verticality while drafting surrounding faces.