Unzip the RAR parts. You should see a file named allupgrade_...pkg or MstarUpgrade.bin .
If the image is flipped after flashing, you may need to enter the Service Menu (usually Menu + 1147 ) to adjust the Mirror settings.
💡 When downloading multi-part files (Part 01, Part 02), keep them in the same folder before extracting. Use WinRAR or 7-Zip to avoid archive errors. 🛠 Installation Steps Format your Drive: Use a USB 2.0 drive formatted to FAT32 .
Searching for firmware files like the "MAGIC 65JP65UASG" often leads to sketchy sites. Since these files are usually proprietary, I've put together a blog post that helps your readers find and install it safely.
This software is specifically for 3840x2160 (4K) resolution.
The standby light should flash rapidly. Do not turn off the power until the process hits 100%. Troubleshooting Common Issues
Place the file in the root directory (not inside a folder). The Flash Process: Turn off the TV and unplug it. Insert the USB drive. Hold the Power button on the TV panel. Plug the TV back in while holding the button.